KitchenAid mixers are a popular appliance in many kitchens, but they can occasionally cause problems after extended use. Some of these troubles are minor issues which can be fixed quickly, but others may require the assistance of a KitchenAid mixer repair expert. By understanding some of the most common issues and knowing how to fix them, you can keep your KitchenAid mixer running smoothly for years to come. Occasionally, simple fixes might not solve the issues of your KitchenAid mixer. At times like this, you would require professional help and would be best served dropping your machine off to a professional KitchenAid repair center such as our stores in Arvada or Boulder.
The following are a few instances that might require the aid of an expert if the given simple solutions don’t work:
KitchenAid Mixer Can’t Turn On
If your KitchenAid mixer won’t turn on, there are a few things you can check before calling for repairs. First, make sure that your KitchenAid mixer is plugged into a working outlet. Next, check to see if the power cord is damaged in any way. If it looks like the cord has been cut or frayed, it will need to be replaced. Finally, if your KitchenAid mixer still won’t turn on, you may need to have it serviced by a professional. KitchenAid mixers are built to last, but they do require occasional maintenance and repairs.
If your KitchenAid mixer suddenly stops working during operation, we suggest you let the device rest for around an hour. KitchenAid mixers sometimes turn OFF automatically when you use them for extended periods of time. However, if the issue persists, it may be indicative of a more serious problem. In this case, we recommend taking your KitchenAid mixer to a qualified repair technician.
Mixer Goes too Fast or too Slow
The “Speed Control Plate” of the KitchenAid Mixer governs the speed of the unit during operation. It is usually located at the back of the machine and can be accessed by removing the covers.
Any issues related to speed in the device are often associated with a problem in the “Speed Control Plate”. This part is located near the bottom of the mixer and is responsible for regulating the speed at which the blades rotate. If this plate becomes damaged or breaks, it can cause the mixer to operate at a higher or lower speed than normal. KitchenAid mixer repair is usually fairly simple and can be done by replacing the Speed Control Plate with a new one. However, if the problem is more severe, it may be necessary to take the mixer to a KitchenAid repair center for further diagnosis and repairs.
KitchenAid Makes Excessive Noise and/or Rattles
One common issue is rattling and noisy operation. This is usually caused by inadequate lubrication. Over time, the gears in the mixer can become dry and sticky, causing them to grind against each other and produce a loud, unpleasant noise. The good news is that this problem is easily remedied. Simply add a few drops of oil to the gears and then run the mixer for a few minutes. This will help to loosen up the gears and reduce the noise level.
Occasionally, KitchenAid owners might hear a faint metallic noise coming from their unit. This is often caused by the worm gear losing a few teeth. At moments like this, you will have to opt for a replacement.
KitchenAid Mixer Not Spinning
KitchenAid mixers are a household staple for many home cooks and baking enthusiasts. But what do you do when your KitchenAid mixer stops spinning? The most common cause is worn-out worm gear. This gear is located inside the mixer and is responsible for turning the mixing blades. Over time, the worm gear can become stripped or damaged, preventing the mixer from spinning. If this happens, it’s best to take your mixer to a KitchenAid repair center for service. Other potential causes of a non-spinning KitchenAid mixer include a failed motor, a broken transmission, or a clogged drive shaft. But in most cases, the problem can be traced back to the worm gear. So if your KitchenAid mixer has stopped spinning, don’t despair—there’s a good chance it can be fixed.
Worm gears absorb stress and friction when the mixer operates. They gradually wear away with use but can also break down as a safety mechanism when the device is overloaded. Thus, it acts as a buffer against excessive stress and protects the other gears within the unit. If a damaged worm gear is what’s preventing your mixer from spinning, you need professional replacement of the gear to ensure no further damage was caused.